1. Unique features
   -Less than 5% purge air without auxiliary equiment,012KW power consumption
   -Pressure and inlet temperature is digital readout on screen,purge air gauge allows manually control regeneration air according to the wanted pressure dew point
   -Small desiccan chambers' group,each chamber unit is independent and detachable
   -Replace with factory filled desiccant chamber ,ease of maintenance and constant pressure dew point -40C (-40F) is ensured
   -The lowest operation cost,user could recoup  dryer investment in three years by saving huge air and electricity
   -1/3 size to traditional dryer
   -The shortest downtime
   -Using Molecular sieve as desiccant

   

2. 
   

3. 
   
   
   2. Details of advantages
   
   Innovative structure with patents,employs small desiccant chamber unit
   
   1.Air flow equally and evenly pass through each desiccant chamber
   2.Avoid channelling effect which more likely happens in traditional desiccant dryer
   3.Small chamber allow no mandatory annul inspection
   4.Molecular sieve capability is much better than Alumina and silicon desiccant in traditional dryer
   5.PLC controller ,Full function touch panel control
   

   
   3.Structure and operation
   
   Biteman dryer have two groups of desiccant chambers,A and B ,according to flow rate,A and B shift between adsorption and regeneration

Technical data:

B-series         Heatless          (-40ºC dew point)

Marks 
Standard working condition:Inlet pressure 0.7MPa≤P<1.0MPa,Temperature T≤35ºC; 
Working condition:Pressure 0.4MPa≤P<1.0MPa,Temperature 2ºC≤T≤40ºC; 
Technical date:Pressure dew point≤-40ºC 
Purge air≤ 5% 
Pressure drop≤0.012MP 
 Noise≤75dB(average); 
 


Ease of replacement of desiccant chambers,it can't be more simpler comparing to exchange of desiccant,only one wrench it is done.Further more,needn't worry the desiccant density after refilling because it is filled in our factory to keep constant and stable pressure dew point,just like new dryer from factory